About this part
The 06J105266AH Dual Mass Flywheel is a brand new genuine OEM dual mass flywheel built for the VW Group engines that drive the DSG DQ200 seven speed dry dual clutch gearbox, most commonly the 1.4 TSI with engine codes CAXA, CAXC and CTHD. The part sits between the engine crankshaft and the clutch of the DSG gearbox, and its two separate masses are joined by a spring damper system that absorbs the torsional vibration of the small turbo petrol engine at low revs, so the gears in the dry clutch box stay quiet and the drive stays smooth. Volkswagen catalogues it in the flywheel group as the dual mass wheel with the stamped number 06J105266, and the AH suffix is the current production revision that superseded the earlier AE issue. Our photographs show the real part as it arrives, not a library image: the cast primary mass with the stamped 06J105266AH number, the ring gear, the bolting for the DSG clutch and the secondary mass are all photographed as delivered. This is a genuine spare built for the VW Group parts network, not an unbranded copy and not a used take off from a scrap car.
Dual mass flywheel — one brand new genuine OEM dual mass flywheel, part number 06J105266AH, for the DSG DQ200 seven speed dry clutch on VW Group 1.4 TSI engines.
OE/OEM Part Number:
06J105266AH, 06J 105 266 AH, 06J105266AE, 06J 105 266 AE, Sachs 2295000513, LuK 41507809, LuK 415057809
The AH revision is the current supersession of the earlier 06J105266AE issue of the same wheel: it fits the same applications and replaces it one for one. Aftermarket suppliers box the identical wheel under the Sachs number 2295000513 and the LuK numbers 41507809 and 415057809, so if your old wheel carries one of those references it is the same part. Take care not to confuse this wheel with 06J105266H, the 240 mm dual mass wheel for the higher torque applications which we also list on this store as product 4195: the H wheel has a different diameter, a different clutch and a different part number, and it does not interchange with the AH. Read the stamping on your old wheel, or send us a photo of the old part together with your VIN and we will confirm the correct number against our stock before the order is packed.
Why this flywheel gets replaced
A dual mass flywheel is a wear item that lives between the pulses of a small three cylinder feeling turbo engine and the dry clutch of the DQ200 gearbox, and after high mileage the internal springs and the bearing between the two masses wear out. The classic symptoms are a rattling or marbles-in-a-can noise at idle that disappears when the clutch is engaged and the engine is loaded, a judder or shudder on pull away that is often blamed on the clutch alone, a grinding growl when the engine is switched off as the two masses rock against each other, and in later stages visible play or grease escaping from the secondary mass. Every clutch job on these gearboxes should start with a proper check of the wheel: measuring the axial and tilt play of the secondary mass and listening at idle in neutral. Fitting a new clutch against a worn wheel ruins the new clutch disc within months, and the wheel is always renewed together with the clutch on cars above roughly 120,000 km. Once the springs inside break, metal fragments can reach the clutch housing and the damage quickly becomes a gearbox out job.
What this part is, and what it is not
This listing is the dual mass flywheel 06J105266AH for the DSG DQ200 seven speed dry dual clutch. It is NOT a single mass flywheel for a manual gearbox, NOT the 240 mm 06J105266H wheel for the higher torque applications, NOT a complete clutch kit and NOT the clutch itself. If your car has a manual gearbox, this wheel does not fit: the manual cars use a different single mass flywheel with a different number. If your engine is the 1.8 TSI or 2.0 TSI with a wet clutch DSG, or a 2.0 TDI, you need a different wheel family. Check the stamping on your old flywheel, the gearbox code on the label in the service book or the spare wheel well, and the engine code before ordering.
Technical specification and what is in the box
Part number: 06J105266AH, spaced label form 06J 105 266 AH, supersedes 06J105266AE. Type: genuine OEM dual mass flywheel for the DSG DQ200 seven speed dry dual clutch. Ring gear: 129 teeth. Bolting: 8 mounting holes for the DSG clutch pack. Applications: VW Group 1.4 TSI petrol engines, codes CAXA, CAXC and CTHD, and the related family engines listed in the fitment table. Markings: 06J105266AH stamped on the primary mass. Supplied: ONE flywheel as pictured. Not supplied: clutch kit, clutch release bearing, bolts, gearbox or tools. Packed weight is approximately 7.5 kg including protective wrap.
Check before you buy
Four checks save a wrong order. First, read the stamping on your old wheel: it should carry the 06J105266 family number, and the suffix letter tells us the revision you had, with AE and AH being the two common ones on the DSG cars. Second, confirm your gearbox is the DQ200 seven speed dry dual clutch, because manual cars and the wet clutch DSG gearboxes use different wheels. Third, count the ring gear teeth or check the bolt holes against the photos: this wheel has 129 teeth and 8 bolt holes. Fourth, confirm your engine is one of the 1.4 TSI family listed in the table rather than the 1.8 or 2.0 TSI. Send us the VIN and a photo of the old part if anything is unclear and we will confirm the number against our stock before the order is packed.
Vehicle fitment
Part number 06J105266AH belongs to the flywheel group of the VW Group small turbo petrol engines driving the DQ200 seven speed dry dual clutch, and it carried over across several model lines as the 1.4 TSI was used in successive platforms. The table below lists the applications we can confirm from catalogue and parts reference data together with the engine and gearbox context that matters. Rows marked VIN check are catalogue level claims where the exact market specification has not been confirmed, so treat them as a prompt to verify against the engine code, the gearbox code or the old part. When the VIN data, the table and the stamping on your old wheel disagree, the old part wins.
| Brand | Model | Year | Engine and notes |
|---|---|---|---|
| VW | Golf VI (5K1) | 2008 – 2014 | 1.4 TSI 122 hp CAXA, DSG DQ200, common fitment |
| VW | Jetta VI (162) | 2011 – 2018 | 1.4 TSI, DSG DQ200, common fitment |
| VW | CC / Passat CC (358) | 2011 – 2016 | 1.4 TSI, DSG DQ200 |
| VW | Beetle (5C1) | 2011 – 2019 | 1.4 TSI, DSG DQ200 |
| VW | Eos (1F) | 2011 – 2016 | 1.4 TSI, DSG DQ200 |
| VW | Scirocco III (137) | 2008 – 2017 | 1.4 TSI, DSG DQ200, VIN check |
| VW | Passat B7 (3C/365) | 2010 – 2014 | 1.4 TSI, DSG DQ200, VIN check |
| VW | Sharan (7N) | 2010 – 2015 | 1.4 TSI, DSG DQ200, VIN check |
| Audi | A3 8P | 2008 – 2012 | 1.4 TSI CAXA, DSG DQ200, common fitment |
| Audi | A3 8V | 2012 – 2013 | 1.4 TSI, DSG DQ200, VIN check |
| Seat | Leon 1P | 2009 – 2012 | 1.4 TSI, DSG DQ200, VIN check |
| Seat | Alhambra (710) | 2010 – 2015 | 1.4 TSI, DSG DQ200, VIN check |
| Skoda | Octavia II (1Z3) | 2009 – 2013 | 1.4 TSI CAXA, DSG DQ200, common fitment |
| Skoda | Superb II (3T4) | 2008 – 2015 | 1.4 TSI, DSG DQ200, VIN check |
| Skoda | Yeti (5L) | 2009 – 2017 | 1.4 TSI, DSG DQ200, VIN check |
| VIN check | Old wheel stamped 06J105266AH | All years | Direct match to this part |
| VIN check | Old wheel stamped 06J105266AE | All years | Earlier revision, replaced by AH |
| VIN check | Aftermarket ref Sachs 2295000513 | All years | Same wheel in Sachs box |
| VIN check | Aftermarket ref LuK 41507809 | All years | Same wheel in LuK box |
| VIN check | Ring gear 129 teeth, 8 bolt holes | All years | Confirms the wheel size |
| Not covered | Manual gearbox single mass flywheel | All years | Different part, different number |
| Not covered | 06J105266H 240 mm wheel | All years | Different diameter, see product 4195 |
| Not covered | 1.8 / 2.0 TSI wet clutch DSG | All years | Different wheel family |
| Not covered | 2.0 TDI engines | All years | Diesel wheel family |
| Not covered | Clutch kit sold alone | All years | Renew with the wheel, order separately |
Installation notes
The flywheel is fitted with the gearbox removed, which on these cars means the DSG is lowered out of the way and the job is normally combined with the clutch renewal. Always use new flywheel to crankshaft bolts and tighten them in the staged pattern to the workshop torque figure rather than by feel: the wheel is a rotating mass and a loose bolt destroys the engine side face within seconds of start up. Inspect the crankshaft face and the pilot area for burrs, keep oil and grease off the clutch friction faces, and fit a new release bearing with the job. After assembly the gearbox adaptation of the DSG should be relearned with a diagnostic tool so the clutch engagement points match the fresh components, and the first few drives may show slight adaptation movements while the system settles. If the wheel is being replaced because of noise rather than a clutch failure, still budget for the release bearing, because it has done the same mileage as the wheel.
What is not included and what is not covered
The price is for ONE 06J105266AH flywheel as photographed. NOT included: clutch kit, release bearing, bolts, gearbox, installation labour or tools. NOT covered: manual gearbox cars, the 240 mm 06J105266H wheel listed as product 4195 on this store, the 1.8 TSI and 2.0 TSI engines with wet clutch DSG gearboxes, the 2.0 TDI engines, and cars whose old wheel carries a different base number until the variant has been confirmed. Problems caused by reusing old flywheel bolts, by installing a new clutch against a wheel that is beyond its wear limit, or by skipping the gearbox adaptation after the job are also not covered by the warranty.
Condition and warranty
Every flywheel we supply is brand new, unused and genuine OEM, carrying the stamped 06J105266AH number on the primary mass, never an unbranded copy and never a used take off. Each part is checked before dispatch: the ring gear teeth are clean and undamaged, the secondary mass plays within the correct new limits, the bolting faces are clean and the stamping matches the number in this listing. We back it with a twelve months warranty against manufacturing defects from the date of delivery. Warranty does not cover wear damage caused by installing the wheel against a worn clutch, damage from incorrect installation or reused bolts, or faults in other drivetrain components. Keep the packing until the workshop has confirmed the part fits.
Packing and shipping
The packed weight is approximately 7.5 kg including the protective wrap, and the wheel travels with the ring gear and friction faces protected so they cannot be dented or scratched in transit. Customs descriptions use motor vehicle engine transmission part, HS 8483. Combined orders are welcome: ask us to pack this flywheel with a clutch kit, a release bearing or another drivetrain part in one shipment to save on freight, and tell us your model year and gearbox code so we can recheck the number before dispatch.
Trade and wholesale supply
Three quantity tiers are available on this listing: 1 pc sample, 5 pcs and up and 20 pcs and up, with the price stepping down as the quantity rises. Workshops that service the DSG DQ200 fleet keep this wheel on the shelf because it is renewed with nearly every clutch job above 120,000 km and the rattle at idle is one of the most common complaints on the 1.4 TSI cars. All tiers are stocked items and volume enquiries beyond the listed tiers are welcome. If you are buying for a workshop, send us the old part numbers you see most often and we will flag any application that needs the 240 mm H wheel or a different family number before the order is packed.
Related parts on this store
The 240 mm dual mass wheel 06J105266H for the higher torque applications of the same engine family is listed separately as product 4195: it is a different part and does not interchange with this AH wheel, so check the number on your old wheel before ordering either. None of the parts on this store replaces a worn dual mass flywheel except the correct flywheel itself, and clutch kits are sold separately. If you need the clutch, the release bearing or the gearbox side parts, search by those words rather than by this listing.









