About this part
The 04L121011N Water Pump is a brand new genuine OEM switchable coolant pump with an electric actuator, fitted to the 1.6 and 2.0 TDI diesel engines used across the Volkswagen, Audi, Seat and Skoda ranges. Unlike a plain belt driven pump, this unit carries an electrically operated control element on the housing: the connector block and the brown plug on a short lead are clearly visible in the photographs. That actuator lets the engine management system vary the flow of coolant between the main circuit and the auxiliary heater circuit, which helps the engine reach operating temperature quickly and keeps cabin heating consistent in cold weather. A healthy pump is central to correct cooling system performance, so a failed or stuck unit can lead to overheating, poor heater output and coolant loss. The part offered here is the real component photographed for this store, with the three mounting ears, the round impeller housing, the VWAG Germany moulding and the actuator connector all original, not a library image and not a used take off.
Water pump — one brand new genuine OEM switchable coolant pump with electric actuator, OE number 04L121011N, for 1.6 and 2.0 TDI engines in VW, Audi, Seat and Skoda models.
OE/OEM Part Number:
04L121011N, 04L 121 011 N, 04L121011, 04L 121 011, 04L121011E, 04L121011E X, 04L121011EX, 04L121011L, 04L121011LX, 04L121011P, GRAF PA1360A-8, SALERI PA1566, HEPU P698, GBM 80160, DOLZ V150, RUVILLE 65019, VAICO V10-50005, TOPRAN 116 449, MEYLE 113 220 0017
The N suffix is the current VAG release of this switchable pump family. Earlier 04L121011, 04L121011E, 04L121011L and 04L121011P versions are listed by catalogues for the same 1.6 and 2.0 TDI engines, and the aftermarket numbers above refer to equivalent units in supplier packaging. Note that GRAF PA1360A-8 is the switchable version with the electric actuator, while SALERI PA1566 is the mechanical version without it: check whether your old pump has the connector and brown plug before ordering. If the number on your old part is a different base number, or if your VIN points to a different engine, send us the VIN and a photo of the old pump and we will check it against stock before the order is packed.
Why this pump gets replaced
The impeller on these TDI engines runs continuously from the serpentine belt, while the electric actuator positions an internal slide valve that decides how much coolant is directed through the auxiliary heater circuit. Over time the mechanical seal can weep, the bearing can grow noisy and the actuator or its slide valve can stick. Typical signs are coolant dripping from the weep hole or the gasket seam, a sweet coolant smell after a run, an engine temperature gauge that climbs higher than normal or rises under load, a heater that blows cold until the engine is fully warm, a rattling or grinding sound from the pump area, and dashboard coolant or temperature warnings. Because the actuator is electrically controlled, a fault can also be logged as a cooling system or heater related diagnostic code. Continuing to drive with a leaking or stiff pump risks low coolant, air in the system and overheating, which can escalate into cylinder head damage. Replacing the unit at the first sign of leakage is far cheaper than repairing the engine afterwards.
What this part is, and what it is not
This listing is the complete switchable coolant pump assembly 04L121011N for 1.6 and 2.0 TDI engines. It is NOT the plain mechanical pump without an actuator, NOT the earlier 03L121011 family used on different TDI engines, NOT the 2.0 TFSI petrol water pump and NOT a thermostat housing or a coolant flange. It is also NOT a universal electric booster pump. The photographed unit has the aluminium three ear mounting flange, the round black impeller housing with the VWAG Germany moulding, the cast outlet neck on top, and the electrical actuator with its connector block and brown plug on a short lead. Those features distinguish it from the Saleri mechanical version, which has no connector. Compare all of them with your old pump before ordering.
Technical specification and what is in the box
Part number: 04L121011N, spaced label form 04L 121 011 N. Type: genuine OEM switchable engine coolant pump with electric actuator, sometimes catalogued as a variable flow water pump or control valve water pump. Application: Volkswagen, Audi, Seat and Skoda 1.6 TDI and 2.0 TDI diesel engines of the model years in the table. Construction: cast aluminium mounting flange with three bolt ears, polymer impeller housing, integrated thermostat style control slide and an electrical actuator with a multi pin connector and brown plug. The flange carries a gasket groove and the body uses the standard VAG mounting pattern for this engine family. Supplied: ONE switchable water pump assembly as photographed, including the actuator and lead. Not supplied: separate gasket, bolts, coolant, serpentine belt, tools or installation labour. Approximate packed weight is 1.6 kg. If your old unit has no electrical connector, you may need the mechanical version instead, so check the photographs carefully.
Check before you buy
Four checks prevent a wrong order. First, read the number on the old pump: 04L121011N or one of the earlier 04L121011, 04L121011E, 04L121011L and 04L121011P releases. Second, confirm the engine is a 1.6 or 2.0 TDI from the models listed, not a petrol TFSI and not an older 1.9 or 2.0 TDI PD engine, because adjacent years used several different pump families. Third, look at the housing: the three ear flange, the round impeller cover, the cast outlet neck and the position of the actuator connector must match the photographs. Fourth, confirm whether your old pump has the electrical connector and brown plug. Cars with the actuator require this switchable version; cars without it need the mechanical pump. If the VIN data, the catalogue and the old part disagree, the old part wins. Send us a photo and the VIN and we will confirm the number before dispatch.
Vehicle fitment
Part number 04L121011N belongs to the cooling system of the 1.6 and 2.0 TDI diesel engine family used across Volkswagen, Audi, Seat and Skoda from the early 2010s onward. The table lists the applications published by parts catalogues together with the engine context that matters. Many model years used more than one pump depending on engine code, so rows marked VIN check are catalogue level claims where the exact market specification has not been confirmed. Treat those as a prompt to verify against engine code, build date and the old part. When VIN data, this table and the number on the old pump disagree, the old part wins.
| Brand | Model | Year | Engine and notes |
|---|---|---|---|
| Volkswagen | Beetle (A5) | 2012 – 2019 | 1.6 / 2.0 TDI |
| Volkswagen | Caddy | 2016 – | 2.0 TDI |
| Volkswagen | Golf VII | 2013 – 2020 | 1.6 / 2.0 TDI, common fitment |
| Volkswagen | Golf Sportsvan | 2013 – 2020 | 1.6 / 2.0 TDI |
| Volkswagen | Transporter T6 | 2016 – 2019 | 2.0 TDI |
| Volkswagen | CC | 2012 – 2017 | 2.0 TDI |
| Volkswagen | Crafter | 2017 – | 2.0 TDI, VIN check |
| Volkswagen | Jetta | 2015 – 2018 | 2.0 TDI |
| Volkswagen | Passat | 2013 – 2015 / 2016 – | 1.6 / 2.0 TDI |
| Volkswagen | Scirocco | 2015 – 2018 | 2.0 TDI |
| Volkswagen | Sharan | 2016 – | 2.0 TDI |
| Volkswagen | Tiguan | 2016 – | 1.6 / 2.0 TDI |
| Volkswagen | Tiguan Allspace | 2018 – | 2.0 TDI |
| Volkswagen | Touran | 2016 – | 1.6 / 2.0 TDI |
| Volkswagen | T-Roc | 2018 – | 1.6 / 2.0 TDI |
| Volkswagen | T-Cross | 2019 – | 1.6 TDI, VIN check |
| Audi | A1 | 2014 – 2018 | 1.6 TDI |
| Audi | A3 | 2012 – 2020 | 1.6 / 2.0 TDI, common fitment |
| Audi | A4 | 2013 – 2015 / 2016 – | 2.0 TDI |
| Audi | A4 Allroad | 2013 – 2016 | 2.0 TDI |
| Audi | A5 | 2013 – 2016 / 2017 – | 2.0 TDI |
| Audi | A6 | 2011 – 2018 / 2019 – | 2.0 TDI |
| Audi | Q2 | 2017 – | 1.6 / 2.0 TDI |
| Audi | Q3 | 2014 – 2018 / 2019 – | 2.0 TDI |
| Audi | Q5 | 2013 – 2017 / 2017 – | 2.0 TDI |
| Audi | TT | 2014 – | 2.0 TDI |
| Seat | Alhambra | 2016 – | 2.0 TDI |
| Seat | Ateca | 2016 – | 1.6 / 2.0 TDI |
| Seat | Arona | 2018 – | 1.6 TDI |
| Seat | Ibiza | 2018 – | 1.6 TDI |
| Seat | Leon | 2013 – 2020 | 1.6 / 2.0 TDI |
| Seat | Toledo | 2016 – 2019 | 1.6 / 2.0 TDI |
| Seat | Tarraco | 2019 – | 2.0 TDI |
| Skoda | Karoq | 2018 – | 1.6 / 2.0 TDI |
| Skoda | Kodiaq | 2017 – | 1.6 / 2.0 TDI |
| Skoda | Octavia | 2013 – 2020 | 1.6 / 2.0 TDI |
| Skoda | Rapid | 2013 – | 1.6 TDI |
| Skoda | Scala | 2019 – | 1.6 TDI |
| Skoda | Kamiq | 2019 – | 1.6 TDI |
| Skoda | Superb | 2015 – | 1.6 / 2.0 TDI |
| Skoda | Yeti | 2014 – 2018 | 1.6 / 2.0 TDI |
| VIN check | Old unit stamped 04L121011N | All years | Direct match to this part |
| VIN check | Old unit stamped 04L121011 / E / L / P | All years | Earlier revision, confirm against VIN |
| VIN check | Catalogue ref GRAF PA1360A-8 | All years | Switchable pump with electric actuator |
| Not covered | SALERI PA1566 mechanical pump | All years | No electric actuator, different version |
| Not covered | 03L121011 pump family | All years | Different TDI engine family |
| Not covered | 2.0 TFSI petrol water pump | All years | Petrol engine, different part |
| Not covered | Gasket, belt or coolant | All years | Ordered separately if required |
Installation notes
On these transverse TDI engines the pump sits on the side of the cylinder block and is driven by the auxiliary or serpentine belt, so access usually means removing the belt and possibly an engine mount or intake piece first. Drain the coolant below the pump level, disconnect the battery where the workshop procedure calls for it, and unplug the actuator connector before undoing the three mounting bolts. Undo the fasteners evenly so the flange is not distorted, then lift the old pump out and compare it side by side with the new one: flange shape, outlet neck, impeller depth and connector position must all match. Clean the mating surface on the block and fit a fresh gasket; this listing supplies the pump shown in the photographs and not a separate gasket kit. Refit the bolts to the workshop torque figure, reconnect the actuator plug and belt, then refill with the correct VAG specification coolant and bleed the system thoroughly. Start the engine, check for leaks and confirm the heater warms up normally and the temperature stays stable.
What is not included and what is not covered
The price is for ONE 04L121011N switchable water pump as photographed. NOT included: separate gasket or seal, mounting bolts, coolant, serpentine belt, thermostat housing, tools, labour or any auxiliary heater parts. NOT covered: the mechanical water pump without an actuator, the older 03L121011 pump family, the 2.0 TFSI petrol pump, cars whose old unit carries a different base number until the variant has been confirmed, and damage caused by refitting a hardened gasket, by running with low coolant or by over tightening the aluminium flange. Problems caused by an incorrect coolant bleed, a disconnected actuator plug or faults elsewhere in the cooling or heater system are also outside the warranty.
Condition and warranty
Every pump we supply is brand new, unused and genuine OEM, carrying the part number and markings shown in the photographs, never a used take off and never an unbranded copy. Each unit is checked before dispatch: the flange and mounting ears are intact, the impeller housing is free of cracks, the actuator connector and plug are complete, and the part matches the number in this listing. We back it with a twelve months warranty against manufacturing defects from the date of delivery. Warranty does not cover damage from installation faults, from reusing an old gasket, from low coolant or from faults elsewhere in the cooling system. Keep the packing until the workshop has confirmed the part fits.
Packing and shipping
The approximate packed weight is 1.6 kg including protective wrap. The pump travels with the flange, impeller housing and electrical connector protected so they cannot be chipped or bent in transit, and the customs description is motor vehicle engine part, HS 8413 or 8483 depending on the destination. Combined orders are welcome: ask us to pack this pump with a gasket, coolant, a serpentine belt or other engine parts for the same car in one shipment to save on freight. Include your model year, engine code and VIN so we can recheck the number before dispatch.
Trade and wholesale supply
Three quantity tiers are available on this listing: 1 pc sample, 5 pcs and up and 20 pcs and up, with the price stepping down as the quantity rises. Workshops that maintain the 1.6 and 2.0 TDI fleet keep this pump on the shelf because seal leaks and sticking actuator slides are a recurring cause of coolant loss and poor heater performance on those engines. All tiers are stocked items and volume enquiries beyond the listed tiers are welcome. If you are buying for a workshop, send us the old part numbers you see most often and we will flag any application that needs the mechanical version or a different pump family before the order is packed.
Related parts on this store
Other cooling and engine parts for the same TDI family are listed separately on this store; search by the part number from your old component rather than assuming that a neighbouring model year uses the same pump. No gasket, serpentine belt or coolant is included with this listing, and those items should be ordered separately if the originals are worn, hardened or missing. If you need confirmation that 04L121011N is the right switchable pump for your car, send us the VIN and a clear photograph of the old pump before placing the order.








