About this part
The VW Golf 8 Steering Wheel is a brand new genuine OEM multifunction steering wheel in the Golf 8 / MK8 design, specified here in the all black configuration with real physical buttons and no paddle shifters. Our photographs show the exact assembly we supply: a black VW emblem in the centre of the AIRBAG cover, black button surrounds on both spokes instead of the usual silver or chrome frames, two banks of click type physical switches, a perforated leather rim with contrast stitching, a gloss black lower spoke insert carrying the R badge, and no paddles behind the rim. This is the wheel buyers ask for when they want the MK8 look without the haptic touch controls: every function is a real, tactile button that can be operated by feel and with gloves on, and there is no capacitive surface to misread a brush of the thumb. It suits MQB platform cars that already run a multifunction steering wheel control module, and it can also be fitted to PQ platform cars when the correct PQ to MQB steering wheel decoder is added to convert the button signals. The decoder is a separate item and is not included in this listing. Because this is a configuration based retrofit assembly rather than a single numbered service part, identify it by the finish, the button type, the emblem colour and the absence of paddles, then check the connector and module on your own car before ordering.
All black physical button multifunction steering wheel — one brand new genuine OEM wheel with black VW emblem, black button surrounds, physical switches, perforated leather rim, R badge lower trim, no paddle shifters, supplied complete with the airbag inflator, AIRBAG cover and wiring harness; PQ decoder, clock spring, steering column module and coding are not included.
OE/OEM Part Number:
GOLF-8-PHYSICAL-BUTTON-SW, GOLF 8 PHYSICAL BUTTON STEERING WHEEL, VW MQB PHYSICAL BUTTON WHEEL, PQ TO MQB STEERING WHEEL RETROFIT, 5Q0953569A, 5K0953569AL, 5K0953569AS, 1K0953549CH, 5NA959442A, 2G0959442K
This wheel is a configuration based retrofit assembly and there is no single VAG OE part number stamped on the visible surfaces; GOLF-8-PHYSICAL-BUTTON-SW is our own catalogue reference, not an OE number. The 5Q0953569A, 5K0953569AL, 5K0953569AS and 1K0953549CH numbers above are the steering column / multifunction steering wheel control modules and clock springs that this wheel talks to, and 5NA959442A and 2G0959442K are the related button sets; they are cross references for the surrounding electronics, not numbers of the wheel supplied and not parts included in the parcel. The PQ decoders are listed separately under PQ-TO-MQB-SW-DECODER and STEERING-WHEEL-DECODER. Always confirm compatibility from the connector, the steering column module part number, the airbag connector and the vehicle VIN, not from a model name alone.
What you receive
One complete steering wheel assembly with the full airbag module. Exactly as photographed you receive the multifunction steering wheel with its perforated leather rim and stitching, both physical button banks with black surrounds, the black VW emblem, the gloss black lower spoke insert with the R badge, and the centre AIRBAG cover. This listing is sold with the complete airbag module: the inflator unit behind the cover, the cover itself and the matching wiring harness. There are no paddles, no touch sensitive haptic pads, no silver or chrome button frames, no coloured or silver emblem and no wood or carbon trim. Nothing else is in the parcel: no clock spring or slip ring, no steering angle sensor, no steering column module, no PQ to MQB decoder, no additional body harness, no steering wheel bolt, no trim tools, no diagnostic tool and no coding service. The three price tiers are for one, five and twenty complete assemblies, which suits retrofit workshops, VAG specialists and parts distributors.
Configuration check. Compare our photographs with the wheel you are replacing. If you need paddle shifters, touch controls, a silver or chrome button frame, a coloured VW emblem, heating, or a different airbag connector, this is not the right assembly. The physical button version is popular for older MQB cars being updated to the MK8 look, and for PQ cars where a decoder makes a modern wheel work with the older column electronics.
Physical buttons versus touch controls
Why buyers choose this wheel. The factory Golf 8 introduced haptic touch surfaces on the steering wheel. They look clean in a showroom, but many drivers find them fiddly in use: a light brush can register as a press, there is no mechanical click to confirm an input, and operating them with winter gloves is awkward. The physical button version keeps the same MK8 three spoke shape and the same multifunction layout, but uses conventional switches with a defined travel and a positive click. Volume, track skip, phone, voice control, menu, travel assist and cruise functions can be found by feel without looking away from the road. For a retrofit into a car that never had haptic hardware, physical buttons are also the simpler electronic match to the LIN bus steering wheel electronics.
The all black finish. This assembly is specified with a black VW emblem and black button surrounds. Most factory wheels use a bright emblem and a silver or chrome frame around the switches, which stands out against a dark interior and looks out of place in a Golf 8 style cockpit built around black panels. The black on black combination is the one customers ask for when the rest of the cabin has been converted to gloss black and dark trim. The rim is perforated leather with contrast stitching, and the lower spoke carries the R badge insert, so the wheel reads as a sporty OEM part rather than a universal aftermarket cover.
No paddles, on purpose. There is nothing behind the rim. This is the correct choice for manual cars, for automatics whose column electronics do not support shift paddles, and for anyone who simply does not want them. If your car has a DSG or S tronic gearbox and you want manual shifting from the wheel, choose one of our paddle shift wheels instead; paddles cannot be added to this assembly later because the harness, the switch carriers and the module coding are different.
MQB and PQ: read this before ordering
MQB cars. On MQB platform vehicles that already have a multifunction steering wheel, the wheel usually plugs into the existing clock spring and the steering column control module takes the button signals over the LIN bus. Even then, fitting is not automatically plug and play: the module index must support the button set, the airbag connector and inflator resistance must match what the airbag control unit expects, and the car normally needs coding with a diagnostic tool so that the buttons, cruise control, travel assist and the steering angle sensor are learned correctly. A wheel fitted without coding commonly leaves dead buttons, a cruise control that will not engage, an airbag warning lamp or a steering angle fault in the ABS and ESP units. Check your existing module part number against the cross references in the number block above before ordering.
PQ cars need a decoder. PQ35, PQ46 and PQ25 cars use an older generation of steering column electronics that does not understand the MQB wheel button protocol. On these cars a PQ to MQB steering wheel decoder must be fitted between the wheel harness and the car to translate the button signals. We list two decoders separately: PQ-TO-MQB-SW-DECODER and STEERING-WHEEL-DECODER. They are not included with this wheel, so add the correct decoder to the order if your car is a Golf 5, Golf 6, Jetta, Passat B6 or B7, Tiguan 5N, Touran, Scirocco, Polo 6R or 6C, Fabia, Yeti, Ibiza 6J, A3 8P, Q3 8U or another PQ model. On PQ cars the airbag circuit is also a common mismatch: the inflator connector and the resistance seen by the airbag control unit must be verified by a qualified technician, and the wheel must never be energised with an unmatched inflator.
The airbag is a safety critical part. This listing includes a complete airbag module, so treat the assembly as a safety component, not a cosmetic trim. Only a trained technician following the manufacturer’s workshop procedure should remove or fit it: the battery must be disconnected and the specified wait time observed, the inflator must never be opened, probed with a meter, heated, dropped or shorted, and the yellow connectors must be handled as the manual describes. Shipment of an assembly containing an inflator is subject to the dangerous goods rules of the carrier and the destination country, so cross border transit times and documentation can differ from ordinary parcels; contact us before ordering if your country restricts pyrotechnic safety components. After installation the airbag warning lamp, the horn and every button must be checked with a diagnostic tool before the car is returned to the road. If your local regulations or your workshop prefer to reuse the original airbag module, ask us about the wheel only configuration before ordering.
Not a universal fit. A steering wheel is matched to the spline, the column module, the clock spring, the airbag circuit and the software, not simply to a model name. Two cars of the same model and year can leave the factory with different steering column modules. Send us the VIN, a photograph of your current wheel and the part number of your steering column module with your enquiry and we will confirm whether this all black physical button assembly is the right one for your car.
Installation notes
Preparation. Park the car on level ground with the wheels straight, note the radio and vehicle settings, and have a diagnostic tool available that can code the steering column module and clear fault codes. Photograph the existing wheel, both connectors and the module label before anything is disconnected. Follow the manufacturer’s battery disconnection and waiting procedure for the airbag system exactly, and keep the inflator and cover facing upwards on a clean bench away from heat, static discharge and tools.
Fitting. Release the airbag module using the factory access points, disconnect the yellow connectors and the horn and button harness, remove the centre bolt and draw the old wheel off the spline without hammering the column. Compare the spline, the clock spring connector, the airbag plug and the button harness with the new assembly. On PQ cars fit the decoder in line at this point, following the decoder instructions, and route the harness so that it cannot chafe when the wheel turns lock to lock. Fit the new wheel with a new or manufacturer approved centre bolt torqued to the workshop specification, reconnect the airbag and button harness until each connector clicks, and seat the airbag module squarely. Reconnect the battery only when nobody is inside the vehicle and the airbag module is fully fitted.
Coding and final checks. Code the multifunction steering wheel, cruise control or travel assist, the steering angle sensor and, where applicable, the lane assist and paddle free variant in the steering column module, then clear all fault codes in the airbag, ABS, ESP, instrument cluster and infotainment units. Test the horn, every physical button, volume and track functions, phone and voice control, cruise or travel assist, the instrument menu, the airbag warning lamp going out, and full steering lock in both directions with no rubbing or clicking from the clock spring. Road test the car and confirm there are no new fault codes. Keep the old wheel and module until the car has been signed off.
Fitment
Fitment depends on the platform, the steering column control module, the clock spring, the airbag connector and the vehicle coding, not on the model name alone. Use this table as a guide, then compare your existing wheel and module label with our photographs and the number block above before ordering. Every PQ row requires a separate PQ to MQB steering wheel decoder. Rows marked Not covered are listed deliberately so that buyers with a different configuration do not order the wrong wheel.
| Make | Model | Years | Platform / engine / notes |
|---|---|---|---|
| VW | Golf Mk7 / Mk7.5 (5G), GTI, R, Variant, Sportsvan | 2013 – 2020 | MQB, 1.0 / 1.2 / 1.4 / 1.8 / 2.0 TSI and 1.6 / 2.0 TDI; check module index and code |
| VW | Golf Mk8 (CD1), GTI, R, Variant | 2020 – 2026 | MQB Evo, 1.0 / 1.5 eTSI / 2.0 TSI / 2.0 TDI; replacing factory touch wheel needs coding |
| VW | Passat B8 (3G), Arteon, Passat Alltrack | 2015 – 2024 | MQB, 1.4 / 1.8 / 2.0 TSI, 1.6 / 2.0 TDI; verify airbag connector |
| VW | Tiguan Mk2 (AD1), Tiguan Allspace, Touran II | 2016 – 2026 | MQB, 1.4 / 2.0 TSI, 1.6 / 2.0 TDI |
| VW | T-Roc, Atlas / Teramont, Jetta Mk7, Lamando, Golf SV | 2017 – 2026 | MQB and MQB A0 variants; verify column module part number |
| VW | Polo AW, T-Cross, Virtus, Taigo | 2017 – 2026 | MQB A0, 1.0 TSI / 1.5 TSI / 1.6 TDI; airbag circuit must be matched |
| Skoda | Octavia 5E, Superb 3V, Kodiaq, Karoq, Scala, Fabia IV | 2013 – 2026 | MQB, 1.0 / 1.4 / 1.5 / 2.0 TSI, 1.6 / 2.0 TDI |
| Audi | A3 8V, Q2, Q3 F3, S3, RS3 | 2013 – 2026 | MQB; confirm the Audi airbag connector and module before ordering |
| SEAT / Cupra | Leon 5F, Ateca, Ibiza 6F, Arona, Tarraco, Formentor | 2013 – 2026 | MQB, 1.0 / 1.4 / 1.5 / 2.0 TSI, 1.6 / 2.0 TDI |
| VW | Golf Mk6 (5K), Jetta Mk6, Passat B7, Tiguan 5N, Scirocco | 2008 – 2016 | PQ35 / PQ46; requires PQ to MQB decoder (not included) |
| VW / Skoda / SEAT | Polo 6R 6C, Vento, Fabia, Rapid, Yeti, Ibiza 6J, Toledo | 2009 – 2018 | PQ25 / PQ35; requires decoder plus airbag circuit verification |
| VW / Skoda / Audi | Golf Mk5, Touran 1T, Passat B6, Octavia 1Z, A3 8P, Q3 8U, TT 8J | 2003 – 2015 | PQ35 / PQ46; requires decoder, module check and qualified airbag work |
| Not covered | Cars with no multifunction steering wheel module or no cruise control | – | a wiring harness, module and coding are needed; not included |
| Not covered | Buyers wanting paddles, touch controls, silver button frames or a coloured emblem | – | this is the all black physical button, no paddle configuration |
Shipping and packing
Orders leave within one to two working days of cleared payment. Each assembly is wrapped so that the leather rim, the black emblem and the gloss black lower insert cannot rub in transit, with the button banks protected and the airbag module secured separately inside a rigid outer carton. Because this listing includes a complete airbag module with an inflator, the parcel is handled under the carrier’s rules for pyrotechnic safety components: tracking can show extra handling stages and delivery times to some countries are longer than for ordinary parts. Please photograph the outer carton before signing for a parcel that shows signs of impact or water damage, and store the assembly indoors, dry, away from heat and out of reach of children until a qualified technician fits it. Import duties, local taxes and any dangerous goods surcharges, where they apply, are the buyer’s responsibility.
Condition & warranty
Brand new genuine OEM all black physical button multifunction steering wheel, supplied complete with the airbag module, twelve months warranty against manufacturing defects covering the assembly as supplied. The warranty does not cover an inflator that has been opened, probed, dropped, heated, shorted, energised outside the vehicle or connected to an unmatched airbag circuit; a clock spring damaged by turning the column with the wheel removed; connectors forced or modified; a wheel fitted to the wrong spline or torqued incorrectly; damage from incorrect coding; or cosmetic wear to the leather, stitching and gloss trim after fitting. Because the airbag system is involved, fitting labour, diagnostic time, coding, decoders, clock springs, column modules and hire of tools are not covered. An assembly that has already been fitted to a vehicle cannot be returned as unused. Photograph the old wheel, both connectors and the module label before fitting, and keep the old parts until the car has been road tested and signed off.
Wholesale
Tiered pricing for 1, 5 and 20 complete assemblies is shown below, with every tier priced for one wheel including the airbag module. Retrofit workshops normally keep the PQ to MQB decoders, clock springs, steering column modules and button sets on the same shelf, so ask for a combined quote if you also need the decoders, the 5Q0953569A or 5K0953569AL slip rings, the 1K0953549CH multifunction module, the GOLF-8-TOUCH-STEERING-WHEEL, R-LINE-STEERING-WHEEL or POLO-6R-PADDLE-SW alternatives. We price mixed orders together and can hold stock for repeat workshop orders. Send the VIN, a photograph of the current wheel, the module part number and whether the car is MQB or PQ with volume enquiries so we can confirm the connector and button configuration before dispatch.








